Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a bandwidth issue getting from our colocated site (inside gigabitethernet0/1) with an ASA5515 configured on Warehouse gigabitethernet0/2.40 (VLAN 40) for a 20Mb EVC to our corporate office. We have Level3 as our provider for the e-line.The is...
We have a bandwidth issue getting from our colocated site with an ASA5515 configured on 0/2 for a 20Mb E-line to our corporate office. We have Level3 as our provider for the e-line.The issue is that we have between 1-5mb speeds copying a file from on...
I have a Cisco 5505 and a TZ170 Sonicwall.I have an IPSec tunnel up but I cannot ping or run DNS over it. Basically no network resources can be accessed between sites on either side.Here is my configuration (as created by ASDM which...
So this is a production ASA. The best I could probably do is put a switch in the middle of ASA and EVC switch (very quickly) and try and connect a laptop up to the new switch and try speed test that way.How would I configure shaper to avoid unmanaged...
I am new to the forum as well but could you explain to me why you are trying to get dhcp from a different subnet 10.0.0.0 than the one configured on your WAP 192.0.0.0? The best scenario for a "guest" network would be to split up the networks and hav...
UPDATE: I can now ping hostnames on both sides of VPN, however, cannot browse the network on either side. I can map drives etc. by hostname or ip...Thanks for any help anyone can give on this....know I am missing something here. At this point probab...
