Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA-5516-X that I'm migrating an old 5510 to. As an example I have the below, which is trying to take inbound port 54321 and routing that to 'thing:80' inside. object network thing host 192.168.1.27 nat (inside,outside) static interface se...
Hi,I see this is a popular one, but I can't see what I have done wrong.the set-up is: a DSL modem in half bridge (it does all the PPPoE connection) passes our static IP (55.167.x.x) to the ASA's outside interface ... (the modem has an IP of 192.168.1...
We installed one of these devices as our gateway a couple of weeks ago, flashed the firmware to 1.2.4(003) and it worked perfectly until this morning where it keeps resetting the ADSL every minute and losing the web interface to the unit.The log endl...
Resolved and working ... thank youof course I needed both the nat_id entries for Main_Network to be 1nat (Main_Network) 1 access-list Main_Network_nat0_outboundnat (Main_Network) 1 192.168.0.0 255.255.255.0Thanks againJoss
Thanks for the reply Ajay,Yes you are correct, I need devices on the 192.168.0.0/24 network to be able to connect to the Internet.I changed the offending line as per your suggestion but the Windows PC I'm testing this with still cannot ping outside l...
On further investigation, it seems more like the LAN ports are getting reset rather than the ADSL. My ISP reports no issues on the line and losing the web interface also suggests that's what's happening.Maybe this error has something to do with it?ch...