Hi Largenb, Thanks for response, Yes I have already checked, IPS policy is properly applied. IPS interface is receiving around 300 Mbps traffic, but IPS is 4270, whose troughput is 4 gbps. below is the show interface statistics for my interface. show interfaces gigabitEthernet3/2[C[C MAC statistics from interface GigabitEthernet3/2 Interface function = Sensing interface Description = SW1 Port 0/2 Media Type = TX Default Vlan = 0 Inline Mode = Unpaired Pair Status = N/A Hardware Bypass Capable = Yes when paired with GigabitEthernet3/3 Hardware Bypass Paired = No Link Status = Up Admin Enabled Status = Enabled Link Speed = Auto_1000 Link Duplex = Auto_Full Missed Packet Percentage = 99 Total Packets Received = 171259 Total Bytes Received = 1214483055 Total Multicast Packets Received = 26 Total Broadcast Packets Received = 0 Total Jumbo Packets Received = 0 Total Undersize Packets Received = 0 Total Receive Errors = 2073827 Total Receive FIFO Overruns = 1978 Total Packets Transmitted = 0 Total Bytes Transmitted = 132603584 --MORE-- Total Multicast Packets Transmitted = 0 Total Broadcast Packets Transmitted = 0 Total Jumbo Packets Transmitted = 0 Total Undersize Packets Transmitted = 0 Total Transmit Errors = 0 Total Transmit FIFO Overruns = 0 Please suggest. Inspection load of IPS is normal, my other interface of IPS is running in Inline which is working properly.
... View more