Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,This is my first time using this service so please be gentle.I have an 871 router connected to a 2960 switch via two ports; both ports are configured as trunks.On one of the router's trunks, I have set up subinterfaces.My issue is - how c...
All the default gatewys for the hosts are correct; hosts in Vlan 5 have 192.168.5.245 as the default gateway. Those in Vlan 20 have 192.168.20.254.I don't know why I suspect it's a Layer 2 issue....
Hi Prajithr,I have other Vlans (other than 5 & 20) set up on the switch:etsw1#show vlan briefVLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default ...
Hi all,I've also just noticed something else that's a bit strange. The router can ping only one of its own subinterfaces; does this make sense?:kai-vlan-gw#ping 192.168.5.245 source 192.168.5.245Type escape sequence to abort.Sending 5, 100-byte ICMP ...
