Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I have a few WS-C2960S-48FPS-L running IOS 15.0(2)SE6 (in stack), and we have devices (cameras, ipphones, printers, etc) authenticating with MAB.The issue is only with print server HP JetDirect 150x, 300x and 500x. The HP print servers is auth...
Hi Steve,The only workaround I found to this issue was change the configuration on those ports from "authentication host-mode multi-auth" to "authentication host-mode single-host". I Did this only on ports where I have these print servers.But when yo...
Hi Neno,I think there is something related to the "ip device tracking".The event "IP-RELEASE/WAIT" happens every 2min, then the printer stops to work.So, I executed the command "clear ip device tracking int gi 1/0/2" and the event "IP-RELEASE/WAIT" ...
Hi Neno,1. Does the issue occur if you remove dot1x from the port? To test this you just have to issue "no authentication port-control auto" You can leave the rest of the commandsIf I remove all the authentication configuration from the port, the pri...
