Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I have configured a Cisco RV180/RV180W PPPoE profile, as described by the KB (Options: Keep Connected, Auto-negotiate).After saving the configuration it won't connect automatically to the internet, even if I restart the device.When I press th...
HI!Can I configure my ASA to serve the anyconnect clients without storing the installer package on the flash if the clients are pre deployed?I have an ASA 5510 with 64MB flash.
Hi,I have an ASA 5512 IOS 9.1 3 leg configuration (Inside,outside,dmz).The goal is:The web server on my DMZ leg is nated to a public IP. If I connect a partner with a VPN tunnel, than it can access to the DMZ through the VPN.If the partner subnet is ...
I need to connect to an other ASA by IPsec remote acces VPN, I have only a pcf file username and password.Is there any documentation how can I do that?
The orders of NAT from your post "NAT0 / NAT excemption with access-list Example: nat (inside) 0 access-list INSIDE-NAT0Static NAT/PAT with or without Policy configurations Static NAT: static (inside,outside) 1.2.3.4 10.10.10.0 netmask 255.255.255....
