Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I’m trying to connect a 2950 switch to a 3550 switch. I have tried straight through and crossover cat 5e patch cables and the results are the same. There is no indication on the 2950 switch port and there is a slow blinking amber light on the 3550 ...
I’m trying to connect a 2950 switch to a 3550 switch. I have tried straight through and crossover cat 5e patch cables and the results are the same. There is no indication on the 2950 switch port and there is a slow blinking amber light on the 3550 ...
1: When connecting other devices to these switches, the ports function normally.2: Having the two switches on the same VLAN did not change the status.3: Cables test good. I’ve had them replace cables with new out of the bag cables. No change 4: H...
I typed the wrong port number for the 2950 switch before. Here is the information.SW2950#sh int fa0/11FastEthernet0/11 is down, line protocol is down (notconnect) Hardware is Fast Ethernet, address is 0012.01e2.308b (bia 0012.01e2.308b) MTU 1500 b...
The 3550 ports are 1000/100/10 Base-T ports. I did have the techs use 3 different Cat 5e cross and straight through cables. The port seems to be auto-sensing. The results are the same with crossover and non-crossover cables.
