About ajemery9

ajemery9 · 10-25-2022

Hi,We currently use a public /24 IP range for a server network, we just had a request to access a server in this network over an aws vpc, however aws does not support connecting to public IP's. Is there a way I can NAT this to a private IP to allow...

ajemery9 · 06-09-2016

Ok so I have a flat network at my home, and I recently got an ap1851. Client can connect to it but they are not getting IP's address's. I think that the vlan on the ssid is wrong/not setup. How do you assign a vlan to the ssid? Thanks AJ

ajemery9 · 11-03-2022

@Rob Ingram I have the following configured but is doesn't seem to be working, am I missing something?Hypothetical IP'sServer IP - 1.2.3.4 AWS NAT - 192.168.1.10 AWS Range - 10.240.0.0/16nat (Inside,Outside) source static SERVER_IP AWS_NAT destinatio...

ajemery9 · 10-25-2022

Hi Rob, yes this is an ASA. I thought we could do it this way but wasn't 100% sure. For the private IP should I just pick a range that isn't in use currently and make this my "private nat" range. I'm sure they will need access to more servers on p...

ajemery9 · 10-25-2022

This is the error they are getting when trying to add the public ip on the aws side.

ajemery9 · 06-08-2016

Hi, John the following commands will reset the AP to the factory settings. clear configreset system Do not save the config. AJ

Member Since	‎11-25-2013 10:33 AM
Date Last Visited	‎10-11-2023 12:18 PM
Posts	6
Total Helpful Votes Received	10

User Statistics

User Activity

NAT Public IP to Private IP for AWS

ap1851 ssid vlan

Re: NAT Public IP to Private IP for AWS

Re: NAT Public IP to Private IP for AWS

Re: NAT Public IP to Private IP for AWS

Hi,