Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Tomas,You can connect an outdoor wireless access point in both buildings to trunk ports in the switches and direct the access points (if it is a directional antenna) to each other and be sure there is a Line-of Sight (LoS) between both of them.Be ...
Hi Chandra,You can configure DHCP in PT with many different ways.First, you can turn on the DHCP service on a Server, then add pools.Second, you can enable DHCP on a multilayer switch using the following commands:ip dhcp pool "pool name"network "ip-n...
Hi Donald,You should use subnetting with the proper prefix /24 so we can use a VLAN for each subnet and those VLANs will communicate through InterVLAN routing configued on the Multilayer Switch so you should have at least one Multilayer switch and yo...
Hi,Check the ports connected between the Multilayer switch and the access switches and make sure that they are trunk ports and VLANs are allowed on the trunk and the PCs are connected to access ports with corresponding access VLANs.P.S there is no ne...
