About ryancraigcascardo

ryancraigcascardo · 12-12-2013

I will try to explain what my current setup and the issues I have run into. I am using all cisco gear.Internet -> Router (192.168.100.1 -> L3 switch (192.168.100.2) -> ASA (Transparent Mode) -> L3 switch (192.168.100.3) L3 switch (100.3) provides in...

ryancraigcascardo · 12-13-2013

JonThere are no clients connected to L3 switch_1. The only reason why L3 switch_1 is there is due to a physical location issue and a fiber connection going from L3 switch_1 to the ASA.I can't post my router config at the moment.

ryancraigcascardo · 12-13-2013

yes the clients are connected to the L3 switches. I'm starting to see the problem but I have some knowledge gaps. Do I setup a trunk on the interface that connects to the 192.168.2.0? If so do I need trunking ports to get to the router? Or would ...

ryancraigcascardo · 12-12-2013

Sorry yes the ips for the L3 switches are for management and not needed in the example. The switches are acting as L2. The routing is occuring at the Router (100.1). L2 access ports.

Member Since	‎12-12-2013 10:13 AM
Date Last Visited	‎04-09-2018 06:45 AM
Posts	4

User Statistics

User Activity

Routing Problem between 2 subnets

Routing Problem between 2 subnets

Routing Problem between 2 subnets

Routing Problem between 2 subnets