Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi! Had setup my Cisco ASA with transparent mode and now need to setup a site-to-site VPN to one of our partner site.I know that there is a limitation regarding this transparent mode and VPN. Had check out most of the cisco documents and all it said ...
All our Win 98SE had the startup logon problem when we migrated to Cisco 1240AP. Previously, we don't had this problem when we are still using the SMC AP.When we want to login to windows 2000 Domain during startup, the system will complain that it ca...
The AP1242 is a brand new LWAPP version.Below are the error message when the AP try to join the WLC:*Mar 1 00:00:46.659: %LWAPP-5-CHANGED: LWAPP changed state to JOIN examining image...Loading file /c1240...Unable to create temp dir "flash:/update"U...
You can't configure the outside interface as management interface. You need to configure the inside interface.But as i had explained, in transparent mode you can't have IPSec traffic going to the tunnel for a particular IP inside the network since th...
After some testing and configuration, i found out that it NOT possible to do site-to-site VPN with transparent firewall mode.The ASA can terminate the IPSec tunnels for management purposes only. That means you cannot establish an IPSec tunnel to pass...
First, thanks for answering my question.If i get it correctly, this mean i CAN do site-to-site VPN on a transparent mode ASA with ONLY one IP address (transparent mode only had one IP for it inside and outside interface, the global ip address).All i ...
For the updates, we had just upgraded the WLC2006 images to ver 4.0.155.5 and the problem solved ! No more complaint or error from the AP.Thanks for all the reply.CMYip
Yes, i had try to manually create the "update" directory without problem in the flash (AP unit) and reboot but the error message is still the same.Regarding upgrading the WLC image to the latest version, since we are on the end-user and we don't have...
