Hi Guys, I'm installing ISE 1.2 on the network and when testing with few machines, some of them reported "errdisable" status on the port after applying the .1X configuration. The config for the port I have is:switchport access vlan 10switchport mode ...

Hi Guys, Did anyone have a hard time integrating ISE 1.2 with SNMP server for polling system parameters? I'm trying to add ISE 1.2.1 to solarwinds SNMP server but when adding the required parameters like IP address and community string and doing an S...

Hi Guys, I have ISE 1.2 primary and secondary setup. NAC agent is working fine on the primary but as a test when I take the primary down to check if secondary will take over, NAC agent doesn't pop up at all. I did some troubleshooting:- HA setup is f...

Hi All, Anyone was successfull in installing IPS 7.0 on GNS3? I was able to get 6.0 working but 7.0 keeps producing errors like "Connection refused: Network error". I tried with different windows 7 and 8 machines but the same thing happens. If anyone...

Hi Guys, I have LMS 3.2, I'm doing periodic configuration backups for the devices added to LMS which are switches, firewalls and Wireless LAN controllers. I did an immediate backup to check if it's working properly and the backup was stored in Backup...