I've created two vlans and enabled inter-vlan routing on both. I can access the WAN from each vlan, but I can't access any device across the vlans. Is there something else I need to do?
viningele,VLAN enable is checked. I'm using one port as a trunk from a managed vlan capable switch. vlan 1 inter vlan is not enabled because I'm not using vlan 1. I'm only interested in vlan 8 and vlan 19. I can ping hosts on vlan 8 and vlan 19 from ...
Marty,I'm using a single port as a trunk. I haven't tried using separate ports with untagged traffic. I'll try using separate ports with untagged packets as a test. Regarding DHCP: I am not using the RV180 to provide DHCP for either VLAN. I have anot...
Tom, Thanks for the reply. Regarding members of the VLAN, I'm using one port as a trunk for both VLANs. I've set up the port so that it sees tagged packets from both VLANs. This seems to be working since I can access the WAN through the RV180 from ei...
