Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have recently been testing EWC capability and failover in various scenarios running on 9130AXI APs and have a query regarding configuration files remaining up-to-date across multiple devices.EWC seems to work fairly well with dynamically allocating...
My environment is not critical enough to justify two physical controllers (or even two cloud 9800-CL), EWC works fine for the most part. I'm generally happy with the setup, and as I've said a few times in this thread I am not looking to increase the ...
I don't want everything to work independently of the WLC, I'm completely happy that if the whole network goes down then I will lose the controllers and the APs will stop working. Even in FlexConnect mode, if both the controllers disappear then new cl...
Hi @JPavonM Thanks for the reply. I think the main issue here is actually scenario (2) in my original post. Whilst the first scenario does also cause the same issue, the problem is most prevalent when the system first powers up. If I have a network r...
Hi @balaji.bandi I think you're missing the point here."Short answer NO - the AP should be EWC for that to accept the Config."The AP's are all EWC-capable running the EWC image. I just need a way to copy the config to those EWC APs, because I cannot ...
Hi @balaji.bandi Thanks for the reply and links. I’ve actually already read those documents multiple times but I still don’t see anywhere that tells me how to copy the controller config to a non-controller EWC AP. Are you able to point me to a specif...
