About Mic_Hael

Mic_Hael · 07-27-2021

Hello,I have a problem, "The process for the command is not responding or is otherwise unavailable" is shown on the shell. I create a cisco TAC (it is running) but after 5 webex sessions I think cisco also do not know what this error is or know the s...

Mic_Hael · 07-28-2021

Hello and thanks, but all these bug ID's are went to the wrong platform or IOS-XE.We are really sure, that the problem is deeper the programming of the platform. Actually the platform team from cisco is involved to find somthing out. We do not know h...

Mic_Hael · 07-27-2021

Sorry, I thing that was my fault, because I jump to an exisitng post from Chris Callison. I have just the same error message and no idea where they come from.

Mic_Hael · 07-27-2021

In my case these are the informations:Catalyst 3650IOS 16.12.4Why i have to enable the wireless mode? There is no wireless mode on this platform, or is that not correct?

Mic_Hael · 07-26-2021

Hello,I have the same problem, but in my case some of the "show" commands does not work. The same output "The process for the command is not responding or is otherwise unavailable" is shown on the shell. I create a cisco TAC (it is running) but after...

Mic_Hael · 09-02-2020

Hi Jay_F, i think you have to make a sync in prime after cleaning the flashes, or wait for the automatically sync. After that prime says flash is fine. Otherwise your problem looks like a part of my problem. I want to upgrade 36xx systems from 16.12....

Member Since	‎08-24-2017 03:31 AM
Date Last Visited	‎12-14-2022 01:41 AM
Posts	6

User Statistics

User Activity

The process for the command is not responding or is otherwise unavailable after %SNMP-3-INPUT_QFULL_ERROR message on logg

Re: The process for the command is not responding or is otherwise unav

Re: need help with Catalyst 3850 error

Re: need help with Catalyst 3850 error

Re: need help with Catalyst 3850 error

Re: 3850 Switch Software Clean