Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a bunch of users getting horrid transfer speeds between locations. Here is the breakdown of the network. All locations are using 7018 switches running VPC and one major revision behind on code. 3 locations:A BC Location A is connected to B v...
Thanks for the follow up. QOS: this was implemented based on a TAC case with Cisco. I had wanted to implement it based off VLANs as the VPC connections from the 5k switches to the 7k switches are just that, layer 2. The goal was to mark it as a COS ...
Here is the QOS on the 5k switches: ip access-list QOS10 permit ip (subnet) (subnet)class-map type network-qos mutationmatch qos-group 5!!policy-map type network-qos mutationclass type network-qos mutation!set cos 5mtu 1500class type network-qos clas...
Service Provider is Lightower. There is a total of 4 point to point connections between A and B.QOS is in place but on a limited nature. From the 5K switches, the COS value is changed from 0 to 5 to give it priority. There is no rate limiting/polici...
