Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
"I inserted a new A9K-24X10GE-TR line card today, which prompted the following errors: RP/0/RSP1/CPU0:Jul 21 22:26:39.997 : pfm_node_rp[357]: %PLATFORM-CROSSBAR-1-SERDES_ERROR_LNK1 : Set|fab_xbar[213105]|0x1017007|XBAR_0_Slot_3
RP/0/RSP1/CPU0:Jul 21...
I'm currently operating an ASR9010 on IOS XR v5.3.4 with a A9K-8T-L in LC slot 1 and 2x RSP440-SE in a redundant configuration. A few weeks ago, I noticed the following errors in my log:pfm_node_rp[357]: %PLATFORM-CROSSBAR-1-SERDES_ERROR_LNK0 : Set|f...
Today, I've just tried adding a second RSP to a running ASR9010 on IOS XR 5.3.4. However, the card's state does not show as XR RUN and there are several error messages in the debug logs. Does this mean that this card has a hardware issue? shelfmgr[4...
I'm facing an issue while attempting to configure IPv6 ABF on a Trident (A9K-8T-L) Line Card for the ASR9K platform. When attempting to commit, I receive the error:interface Bundle-Ether200
ipv6 access-group ipv6-ingress ingress interface-statistics...
I'm facing an issue on NXOS 7.0(3)I7(3) running on a Nexus 3048TP switch with deleting a snmp-server use-ipv4acl/use-ipv6acl statement.
Originally, I had a 32-character SNMP community (only last 4 character shown):
snmp-server community ***********...
Hi,For debugging purposes, IOS XR was upgraded to 6.4.2 (latest supported on RSP440) with SP3. However, this error is still present. I assume this means bad hardware.Is there any way to verify if this error is 100% due to a bad linecard only? What ar...
Hi,I currently am only running the base version of XR 5.3.4 with no SMU's or SP's installed. I don't want to install any SMU's or SP's unless there is even a remote possibility that it will help.Is there any way to verify (ie. looking for a specific ...
This is unrelated, but I know a secondary RSP added to a chassis will automatically sync up to the primary RSP, even if the contents of the disk/version of IOS XR is different. Would there be a way for me to inspect and retrieve the files off a secon...
They do have an implicit deny at the end of them, although I'm not sure how that would apply to my specific situation?
The only thing I can seem to come up with at this point is using a modified CoPP service policy with police pps set to zero, alth...
