About sazeya

sazeya · 09-20-2024

Hi,I am trying to upgrade C9300L-48P-4X switch to Meraki Special Image "cat9k_iosxe.17.09.03m3.SPA.bin" but the switch is not able to boot on this IOS and getting stuck. Encountering this issue on multiple switches. Any inputs/suggestions would be ...

sazeya · 11-15-2024

Hi @ayaz4kiit In Bundle Mode, the switch runs the software directly from .bin bundle file, which contains all necessary components bundled together. Advantages: Simplicity: Easy to manage since all components are in a single fileUpgrading the switch...

sazeya · 11-14-2024

Hi Krishnamoorti, When upgrading a stack of two C9200 switches, you cannot upgrade the standby switch first and then perform a failover to upgrade the active switch. The upgrade process for a stack typically involves upgrading the entire stack at onc...

sazeya · 11-07-2024

Hi Renee, Thank you for the question. Yes, you can upgrade the switches directly from version 16.9.3 to 17.9.5. Cisco provides the flexibility to upgrade to the desired version without requiring an intermediate upgrade. However, before proceeding wit...

sazeya · 09-27-2024

There is no issue in upgrade process. I can see packages.conf and .pkg file but after reload it does not boot on .conf file. Tested with .bin also (Bundle), not booting. However, the same switch booting up on other supported Catalyst image. I will po...

sazeya · 09-24-2024

Not yet onboarded. We first have to upgrade the switch and then check.

Member Since	‎10-06-2017 02:57 AM
Date Last Visited	‎12-10-2024 12:11 AM
Posts	8
Total Helpful Votes Received	9

User Statistics

User Activity

C9300L-48P-4X switch not booting on Meraki Special Image "cat9k_iosxe.17.09.03m3.SPA.bin"

Re: AMA - Software Upgrade on Catalyst 9000 Series Switches

Re: AMA - Software Upgrade on Catalyst 9000 Series Switches

Re: AMA - Software Upgrade on Catalyst 9000 Series Switches

Re: C9300L-48P-4X switch not booting on Meraki Special Image "cat9k_iosxe.17.09.03m3.SPA.bin&qu

Re: C9300L-48P-4X switch not booting on Meraki Special Image "cat9k_iosxe.17.09.03m3.SPA.bin&qu