Yes if needed, I will open the rules in the firewall but the goal was to access only capwap and not lwapp anymore. Because we have ordedred a lot of access points in standalone mode, we have to upgrade each one so the most simple for me was to conve...

Thank you. Of course I will use CAPWAP.But my question was also for example for the 1240 series with LWAPP and CAPWAP possible ...

Sorry, it's difficult to explain.In all the case, we use the lightweight mode access point. In our infrastructure we use CAPWAP.Because we are using CAPWAP we have opened only in the firewall, the following ports used for the CAPWAP tunnel:UDP 5246 &...

Ok but the RCV image should be a CAPWAP type or LWAPP type? I'm wondering if an image exists for each type ?If it's mandatory to convert a standalone to a lightweight (LWAPP) I will update my firewall to authorize the LWAPP and CAPWAP ports.

Thank you all for the information.Correct me if it's wrong.When we have an access point in standalone mode, it's possible to upgrade it in lightweight mode with a LWAPP image.In our case, because we use the CAPWAP, we have blocked in the firewall the...