Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody!My name is AntonI am using VPN client 3.6.3A to connect to our internal netwotk this is vpn client to PIX 515 connectionIt works, but there is one problem i am not able to browse thru network placesi am using win2k pro as os, my lapto...
Hello everyone!My name is Antoni need to completely exclude one device from getting dhcp address, which is configured on pix i am suspecting this device is an intruder to my network, i know ip address and Mac address of this device and it looks like...
hello!i am trying to use clear interface command from config mode on pix-525 to clear interface counterspix taking this command and do not return any error message, but when i do ''sh int'' command i still see the same countersplease respondi will ap...
hi, my name is anton.i cannot ping my inside interface hosts from hosts on dmz,also cannot get thru from hosts on inside interface to hosts on dmz.i am testing the pix so i have all access-list set to ''permit ip any any'' .i have default route point...
Hello Sarah!thank you for your replypix is passing NETBIOS traffici am logging in as a domain admin, so should me no problem with permissionsregardsAnton
Hello!If you are using DES make sure that you have following commands in your config:isakmp policy priority 1 authentication-preshareisakmp policy priority 1 encryption desisakmp policy priority 1 hash md5isakmp policy priority 1 group2isakmp policy ...
hi Thomas!thank you very much for your response it really helped i did have right nat command and global,but i did not have right static command to map hosts on inside interface to hosts on dmz.Now it is working.once again thanks a lot
