Hello Team , i am using WAN Engine Automation 7.2 and below is the configuration, nimo topo-igp-nimo network-access wan_network_accessnimo topo-igp-nimo igp-config 0seed-router dfw10-wxbb-rr01igp-protocol isis!nimo topo-igp-nimo collect-interfaces tr...

it is the first time that i install and configure a Nexus 1010.After unpackaging, i have upgrade the BIOS, CMC and Firmware of the nexus 1010 (like a classical C-serie server)The CIMC 's @IP is 10.10.0.100 ; I have connected the 10/100 Ethernet CIMC ...