Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have 2 hosts inside my network that each need to communicate with a remote network. there are two ways to get to the remote network and each host needs to take a unique path.Ie, inside the DMZ there is RouterA which leads to 192.168.168.1 and Rout...
i have 2 hosts inside my network that each need to communicate with a remote network. there are two ways to get to the remote network and each host needs to take a unique path.Ie, inside the DMZ there is RouterA which leads to 192.168.168.1 and Rout...
What is the best practice method of creating a HA pair of routers running Frame Relay as the WAN protocol? I know that HSRP would be the best on the LAN side, but what about the WAN side via Frame Relay?
I am trying to find out the best way to implement VPN as a failover / backup to a T1. This assumes two seperate devices (router and vpn conc).Is the best way to use weighted routes, ie:ip route 10.0.0.0 255.255.255.0 serial0ip route 10.0.0.0 255.255...
thanks for the suggestion and i think it would probably work. however, part of the problem with my whole scenario is that RouterA and RouterB are not under my control (i have no access to them), hence their location in the DMZ.i actually did speak w...
I agree with the "it depends" statement. I find myself answering many questions like that.The toplogy is FR over IP (L2TPv3), but it seems to behave like a ptp link (down,down -etc) when there is trouble.Am I correct in assuming that the best way to...
