We had some time to circle back to this recently and have discovered the following. Ricoh provides little to no documentation or support on their SIP stack (even to their own USA division). We did find out with Ricoh-USA engineers that SIP to Cisco ...
Wes,
I have not had as much time as I'd like to dedicate to this as I've been pulled off to other projects. Next week I plan to spend some time working more on this. I do have a request in to Ricoh (though they're not very responsive) and will lik...
I re-ran the debugs and did a wireshark capture at the Ricoh machine itself. The MGCP call ID is listed below.
Oct 10 13:25:01.942: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x2091
Thank you,
Eric
Attached are the logs.
The failing call is:
Oct 9 18:41:15.110: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x1ECF
Please let me know if these lend any insight into why the outbound is failing.
Thank you,
Eric
Once I get the machine to re-register to Call Manager again I will test and gather the debugs. Something I changed as a test broke the registration and I can not get it to come back yet. I will post the debugs as soon as I can.