I have an issue connecting to a ftp server using a Windows pc sitting behind an ASA5505. I have tried command line and using Filezilla. With command line is states connected then connection closed by remote host. With Filezilla is states connected...

It is my understanding that in order to restrict vpn connection either site-to-site or client via ports the "sysopt connection permit ipsec" command needs to be disabled and the control then comes from the access-list that is inbound on the outside i...

Having issues with these devices staying connected. When doing a sho isa sa on the pix it states created 1 tunnel but not traffic goes across. We have disconnect and reconnect on the linksys side to restablish the connection. Any ideas?

Has anyone had success on creating a site-to-site vpn with a Pix 501 and a Linksys RV082? I am having an issue establishing a connection. State on the pix side says: MM_NO_STATE Both sides are setup for 3des/md5. pre-shared key. Any ideas?

I have a situation where a remote network (a) that is connected to corp office via frame relay needs to access remote network (b) that is connected to corp office via vpn (pix to pix). Remote(a)-->FRelay-->Corp1721-->pix515-->internetinternet<--vpn<...