Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Personally, I am not impressed cisco will not provide basic software updates by allowing download of the images for their products (even if its for a limited period).Anyway, anybody know what the cheapest support contract cost that will enable me ach...
This may sound dumb but in the absence of any other idea, I will give it a try. 1) Do a "wr net" from the old pix so config is saved to a tftp server.2) Open config on tftp with a text editor and edit leaving only the VPDN config lines and save.3)Do ...
It is possible to change your restricted license to an unrestricted license with the an activation key.To obtain it, do a "show ver", copy your PIX serial number and mail it to licensing@cisco.com. Any other enquiry i.e cost should be handled from th...
Configure the inside interface with an ip address and enable it so it can connect to the tftp server. Then issue a configure net :NOTE: You may have to use a different IP address on the inside interface if this done on in a live enviroment to prevent...
This URL will come in handy in identifying ports used by these applications.http://www.chebucto.ns.ca/~rakerman/port-table.htmlWith this in hand, you should be able to block using access list.Cheers
aaa failback was introduced in the 6.3 (4) PIX OS. Its not something I have tried but this extract from an earlier discussion might help youhttp://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutlin...
