Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi..I have a 515e with three interfaces:inside: 192.10.200.181outside 10.20.1.253DMZ: 172.16.1.1Originally i had a webserver in the inside network and accessing from internet through a static:static (inside,outside) 10.20.1.210 192.10.200.210 255.255...
Hi..I have installed 1 central 3550 and 2 more connected by fiber over giga ports.Al three switches are in the same Lan 192.168.1.0.I need to configure in one of this another network eg.192.168.2.0.The applications server has the ip 192.168.1.1, and ...
Hi,I´m have a probelm when I Tried to connecting a Wireless Multipoint Device ROR 1100 form Orinoco to 3550.After few minutes of connection, the line protocol of this port goes down.The port is configured like a L2 with no other issue.Before this swi...
Hi..I have a customer like this...this link could be useful for your configuration.http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtmlRegardsFD
I was configure two vlans 1 and 2, interface vlan 1 for network 192.168.1.x and interface vlan 2 for 192.168.2.x. on central 3550.The gateway of the hosts are the address configured in this interface vlan.But my problem is that from the vlan 2 i hadn...
