With a pix 501 or 506 firewall is the udp port 123 enabled for access by default or do I need to open the port for access.. Atempting to use Windows 2003 Server to access the internet for sycronizing time on the Domain controller. Any suggestions or ...

I have one pix firewall 192.168.0.1 setup for the internetand I will be setting up another firewall for a framerelay to a state agency. With windows 2003 server I added another gateway of 192.168.0.2. The framerelay uses internet explorer as the a...

with the pix I think you can connect to a time server and have the pix synchronize with the internet or the pix can act a time server not sure about the second part. ... I am testing a w2003 server enviroment.... what is the best way to have the dom...

I am a little confused on how to upgrade the pdm... cisco states they no longer support tftp softare...if the pix firewall has a tftp server why do i need software.... can't i set up the pix as a tftp server and copy tftp flash the pdm.bin file to u...

Is there any recommendations for a simple tftp software so I can upgrade my pix pdm to 3.01.any links or suggestions would be appreciated