Pix 501 and PDM

[npd5]

with the factory default setting I can log into pdm but I need to change the inside ip address. The address i changed the firewall

to is 192.168.0.14 for inside and I do that in pdm. When I reboot my system make my computer 192.168.0.8 and a gateway of 192.168.0.14 I can't access pdm any more.... any suggestions or links would be appreciated

[mathia5]

Did you add the new ip address of your PC to access PDM

with the http command?

[npd5]

no and that was the problem. Thanks