From the wlc, the command show ap auto-rf 802.11a <ap_name> should display the neighbors on the 5ghz band. The signal quality with netsh is not a reliable value (it is not related to a specific RSSI but only a Windows threshold). I have a .exe progr...
Hello, Do you know how many spatial streams are on the NICs used ? Usually Phones, Laptops have 2 spatial streams so according to the VHT MCS rates, you cannot achieve the same throughput with 1 spatial stream or 2 and more. Your AP supports 4x4 MU-M...
The following WLC platforms cannot be used for anchor functions, but can be used for standard controller deployments and guest mobility tunnel origination (foreign WLC) to a designated anchor controller(s): - Virtual WLC You should not have probl...
Hi Sam, As far as I know, the role string is the only thing that should be provided by the well-known cisco-av-pair in a local policy. The Radius engine on the WLC is light. When you configure your local policy there are only 3 conditions that you ca...
@LucasC88 wrote:The other APs will pick up the controller role but it initializes as if it is a fresh controller without a config (provisioning mode) Are the other APs on the same Vlan than your current Master AP ? You can check if your Surbordinate ...