Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What do I need to do to optimize ppp and aaa for MS DUN users?Also, what's the difference when adding options to the serial D channel interface and the group-async interface. I noticed you can configure the same options for both.
Can you look over my new config to make sure it looks ok? This access server is an AS5400 with 8 T1 isdn pri lines attached. It’s only purpose is to be used a dial-in box to our network. It will not be used to dial out. It has 1 d channel for eac...
Can you have two default routes with PIX 515? My goal is to be able to hook two interfaces to different routers. Each of the routers will be using BGP and they will serve as a redundant internet connection. This would require two pix interfaces an...
Greetings,I am thinking about setting up a redundant internet presence with our ISP. They will provide two routers and they will be using BGP between them. I have two PIX 515 firewalls that will sit in between those routers and our internal network...
Does the CSS support two Pix515 uplinks? I'm trying to setup a fully redundant path between my active/backup PIX and my active/backup CSS. I have one link to the pix that acts as a primary and a secondary link that is only active when the first lin...
Yes, I do mean faster connect time for MS DUN users. Also I want to make sure that compression is being used. Here is how my async group is setup:interface Group-Async1 ip unnumbered Loopback1 no ip redirects no ip unreachables encapsulation ppp no...
The D channels are supposedly setup properly according to them. We verified which was the primary and the backup. They have to check a few other things on their side. The switchtype is Custom, 4ESS and it is a NFAS setup:'SR is adding 8 new ISDN T...
Actually, I had to change the config. The telco provisioned it as a NFAS group. Here's I have those setup ok but the primary D channel says active whereas the backup d channel says out of service. Also, calls only get sent to the modem when they c...
