Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all.I'm having a strange problem on my cat 4506. I only use logging buffered debugging but when i issue 'show logg' i cannot see changing in interface status. If i plug a cable into a port, i expect a new log that show me that the interface (for e...
I would like to know how to configure 2 router with VRRP or HSRP + static nat and avoid ip duplication.I need to have failover configured on two routers and some static nat 1:1 to reach some hosts on a overlapping network.Doing so, i discovered "ip d...
Yes ok. I post a very simple example of what i try to obtain.A)On DMZ1 (192.168.100.0/24) a client need to reach 192.168.2.1 on inside whitout natB)On DMZ1 (192.168.100.0/24) a client need to reach 192.168.2.2 on inside with a translated address (xla...
I found that removing nat exemption access-list, the overlapping message go away.I think i made some mistake on con figuring exemption and static nat, but i cannot find the solution.
I cleared all static configuration and added e simple example to test it, but the error message still here.The strange thing is that only when i'm inserting a new network object in an object group the INFO message appear.Why?Using the command you gav...
