About ANDREYE

New users logon issues with a/b/g · 06-08-2004

Hi, My customer switched from D-link 54g cards to the Cisco PCI a/b/g cards, and after doing so if a new user is to log on a PC, he is not able to access the domain, however if it is done with the D-link cards the issue doesn't occur.the new user, wi...

Re: New users logon issues with a/b/g · 06-09-2004

Thanks Rick, I will provide this information to my customer.If you have a bug Id, I would apreciate it if you could post it; so that i can provide it to my customer.regards,Andrey.

ANDREYE · 06-08-2004

in the ACU, just specify under the preferred AP 1 field the MAC address for the AP you would like the client to keep associated to; this forces an association that doesn't require the use of different SSIDs.

ANDREYE · 06-08-2004

the 340 series bridge uses the standard spanning tree protocol on the wired (Ethernet) side, but not so on the wireless porting (radio).the 350 series bridge DOES use the standard spanning tree on both the wired and wireless side, and so that causes ...

ANDREYE · 06-08-2004

The 802.11 standard didn't define the bridging function nor the repeater function.The Bridges, Workgroup bridge and the repeater function Cisco products provided are possible because of the Aironet Extenssions, a Cisco propietary function that, needl...

Member Since	‎06-08-2004 08:55 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

New users logon issues with a/b/g

Re: New users logon issues with a/b/g

Re: But I don't want to roam!

Re: 350 and 340 bridges...they don't talk very well?

Re: Can I use my aironet 350 in repeater mode to a linksys WRT54