Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
@filopeter, No you cannot create your own tar and install the package.But you can check the Golden ISO option - https://www.cisco.com/c/en/us/td/docs/iosxr/ncs560/system-setup/70x/b-system-setup-cg-70x-ncs560/build_and_install_golden_iso.html
Try this in a Maintenance Window
run ls /dev/usb00
process restart umass-enum location 0/RSP1/CPU0
process restart umass-enum location 0/RSP0/CPU0 run ls /dev/usb00
enable 'terminal monitor'You should see below error message:isis[1013]: %ROUTING-ISIS-5-AUTH_FAILURE_DROP : Dropped P2P IIH from Bundle-Ether11 SNPA 6c9c.ed2c.d95b due to authentication TLV not found
To resolve this use below command under the isis i...
