Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having a problem getting OSPF LSA's over an IPSEC VPN tunnelOur Network Currently has OSPF at the Core in 2 different locations, our main site has a BGP routing based IPVPN (Time Warner MPLS Dedicated Circuit) to our Sister location. This is bei...
I have been giving a new subnet for my DMZ interface, the PIX 515e with IOS ver 6.3 (3) has 3 interfaces, inside, outside, and DMZ. The outside subnet and the DMZ are different subnets.I have setup a server in the DMZ with a Static Nat to the inside ...
I need to send static pat ports to the same internal IP and port ACl's are access-list inbound permit tcp any host 209.7.209.242 eq 8084access-list inbound permit tcp any host 209.7.209.242 eq wwwAnd the static pat staements are:static (inside,outsid...
Good Day Dingdongliu, 44.18.20.65 is the ISP router for the louasa5520.Default route is being set with the route Outside_2 0.0.0.0 0.0.0.0 44.18.208.65 1 statement in Louasa5520.55.163.15.126 is a CPE router in the Corp location and is the default ro...
Thank you for your reply's, I wanted you to know how I fixed it.I theorized that the problem was that when traffic was returning from the server on the way out, the pix would look at the destination address and decide that the traffic was local to th...
I appreciate your response and the config changes would be something like this:static (DMZ,outside) 63.87.109.9 46.18.106.163 netmask 255.255.255.255 0 0 and add: access-list inbound remark Allow CITRIX/ICA Traffic to Citrix Serversaccess-list inboun...
