About TurnersID

TurnersID · 03-16-2015

I have a 3750 core switch connected to 2 ASA firewalls inside interface. Each firewall has a separate internet connection (outside interface)I have put in 2 static routes as follows:ip route 0.0.0.0 0.0.0.0 172.16.30.253 (.253 inside interface IP o...

TurnersID · 03-23-2015

Hi All I have a question in regards to capture:1. whats the maximum size of capture that can be done on the ASA. Reason being, I have started work with a company which has may any any rules to destinations in the DMZ and external. I want to tie it do...

TurnersID · 03-17-2015

Will check this in testing this evening.

TurnersID · 03-17-2015

Testing from inside LAN to internetThe test PC has access to internet when going through FW1 inside interface.When FW1 inside is disconnected it should flow through FW2 inside interfaceThis is what is not happening. The internet side of setup is fine...

TurnersID · 03-17-2015

Yes the Internet circuit is from the same ISP. The outside interfaces are connecting to the GW and are on the same subnet.egFW1 outside int is: 202.x.y.1/28FW2 outside int is: 202.x.y.2/28GW1 connecting to FW1 outside is: 202.x.y.3/28GW2 connecting t...

TurnersID · 03-17-2015

Note:The default route on the FW points to the HSRP IP between the gateways. Both the Gateways have active internet connection. (2 separate circuits used)The issue is not on the internet side of things. What I want is that is the inside interface of ...

Member Since	‎03-15-2015 06:22 PM
Date Last Visited	‎10-02-2019 02:03 AM
Posts	6

User Statistics

User Activity

Default Route to 0.0.0.0 via to GWs

Hi All I have a question in

Will check this in testing

Testing from inside LAN to

Yes the Internet circuit is

Note:The default route on the