About SuperZook

SuperZook · 03-09-2012

Hi all,I am having a problem with a 2504 WLC. When I ping the management interface I have 35% packet loss on average. Here is my setup:WLC: 2504LAP: 1142NSwitch: HP ProCurve 2520G-24-PoEThe management interface on the WLC is the only interface I use,...

SuperZook · 03-09-2012

The aggregated link that was causing the problem was between the switch and my router, that's why I don't understand why the WLC had the connectivity problem. I have now removed the trunk (=etherchannel) config on the switch and on my router and I am...

SuperZook · 03-09-2012

removed the port aggregation config on my switch and now it's working. not 100% sure why though...FYI, the aggregated ports were connecting my router/firewall to the switch. thanks everybody for your help, much appreciated!

SuperZook · 03-09-2012

changing the native (primary) vlan didn't help either.current config:the wlc management port is tagged (vlan id 198)the switchport the wlc is connected to is tagged (vlan id 198)this means dot1q encapsulation is enabled on the switchport...

SuperZook · 03-09-2012

i am not sure about the native vlan part, I'll try changing the primary-vlan-id from 198 to 1...

SuperZook · 03-09-2012

the config you posted is a Cisco config but the switch is an HP one. the cisco trunk config is referred to as tagged vlan ports in the HP world. (and a HP trunk is what you'd call an etherchannel on the cisco side, so basically port aggregation)

Member Since	‎03-09-2012 02:36 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	8

User Statistics

User Activity

Ping to WLC management interface times out

Ping to WLC management interface times out

Ping to WLC management interface times out

Ping to WLC management interface times out

Ping to WLC management interface times out

Ping to WLC management interface times out