@joyaljp Thanks much for the detail. I have tried that but it did not worked. the error was "Request failed : Disable AP before configuring country code"This issue got fixed now, To change the country code on the Access point I have "disabled" the ac...
@joyaljp Do you mean we need to disable the 802.11a/n/c and 802.11b/g/n Admin Status of the AP and try changing the AP country code ? or do we need to disable this on the WLC Global parameter and uncheck the Enabled option for 802.11a and 802.11b/g...
Recommended Action: Verify in the network if you have any devices which have the same IP address in the network.Verify ARP entry from the core devices and see if you find two MACs for one IP.Verify DHCP configuration & see if the same IP is reserved...
Hi Brandon,
I do see a Fatal erro in your logs. if you are upgrading FMC to 6.2.3 then all your sensor in the FMC must be at least on 6.1.0 version.
The Fatal error mainly refers if the senors are not supporting to the FMC upgrade which you are...
