Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,we are running about 10 ASR1002-F as IPSEC Concentratorswith IOS (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.1(2)S2, RELEASE SOFTWARE (fc1)Now we are getting on some of our ASRs, the following syslog outputs, in a quite regular base:Mar 6 08...
Hello we are using ASR 1002 with inter-chassis redundanz.In general the replication of nat sessions is working, now we want to change the whole thing to pat.Now we are observe an issue if the device is configured to use patNAT1#show ip nat translaPro...
Hello,we are using the ACE to establish a redundancy for our vpn devices.In this setup there is one aktiv and one standby box.If the primary box goes down all the tunnels are put to the standby box, this is working as expected.Now we have the Problem...
Please explain then following behavior:I change the config to use sticky serverfarms to ensure all connections from a client face the same rserver.Now if the primary sticky farm fails the sticky entry is removed and a new sticky entry to the backup f...
Hi again,@Joo you are right if a scenario is used with an primary and a backup rserver, but if you use a primary and backup serverfarm it should work in theory, but it does not work in practice.Enabling Load Balancing to a Server Farm (Configuring a ...
