Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I have a setup like this:A central WLC 5508 running code 7.2 with management vlan 10 ( range 10.10.10.0/24), corp-user vlan 100 (10.11.10.0/24) with WPA2 key, guest vlan 200 (192.168.0.0/24, on local dsl modem) with WPA2 key...A remote WLC 5...
Scott, The remote site AP ports are trunked (in our case tagged on HP switches) and vlan support on the flexconnect (H-Reap) tab is enabled with native vlan (should it give a problem that the native vlan id's are the same on both sites?) and the res...
Scott, Thank you for your reply..The sssid's on thee central WLC are configured witl local switching, the remote WLC not. If I configure the remote WLC also with local switching I can't get dhcp on any ssid on the remote WLC.
The remote site AP's are all in Flexconnect mode. The thing is when they failover to the central WLC users get a dhcp address in the central management vlan and not the remote user vlan...
