Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have a 2611 with two (2) ethernet ports and NO OTHER modules running IOS 12.0(5)T1 and system bootstrap ver 12.2(10r)1.Besides the NAT/PAT config issues are there any other issues i should be aware of pertaining to the configuration of the router...
I can provide my config NAT setup. On the public side is a Aperto Wireless gateway ethernet port to Internet. I am adding this router to provide NAT/PAT. The local network is up and running aok.2611 with 2 ethernet ports e0/0 e1/0. One has public ...
Hi VincentIp is set to the e1/0 default gateway, which in this config is 192.168.1.1 because the laptop is in the e1/0 network.I am missing the thread of your point about "ip nat source list 1 ..." after looking at the code listing do you see a probl...
Hi VincentThank you again.I am very interested in your conclusion."This line is incorrect, although I don't think it's your problem: access-list 1 permit 38.x.x.0 0.0.0.255 "Why isn't it my problem and what are your thoughts about the access-list?Rob...
