Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to do something like this for the ASA 5506-X:
https://supportforums.cisco.com/t5/service-providers-documents/asr9000-xr-how-to-use-port-spanning-or-port-mirroring/ta-p/3108031
I found this, which states that port mirroring is possible o...
Seems like this should be a simple thing, but I'm stuck. I have FTD installed, but the network settings I gave during the install process did not "take" and I do not see a way to configure the interfaces with IP addresses from looking through the doc...
I have an ASA 5506-X K9 (not the Sec-Bun) with a Control license. Is this enough to do anything at all with FTD, like manage the ASA function? I'm pretty sure I'd need additional licenses to do anything else.
Also, is there a process to reimage bac...
I'm trying to reimage a 5506-X with the FTD image, unable to get basic connectivity from my laptop when using the settings described in the documentation.
My laptop is plugged directly into M1/1 with a static IP.
The firewall is using another IP wit...
I'm not trying to do a tcpdump solution, I'm looking for a way to mirror the port. My FTD is unlicensed so I'm looking for a long-term ASA solution with port mirroring, rather than an FTD solution.
Just to add, the control license cannot be converted to Smart licensing, and I was informed by Cisco licensing support that more than a basic control license is needed to use FTD. Since I already installed FTD my only option is to do a 90-day trial l...
This was resolved, there was an IP subnet conflict between the Inside & Outside networks. I had to re-IP my outside network to be a different subnet, when I rebooted the FTD it started pulling a different DHCP address, and is working now.
Now, on to ...
For the ASA I have
Address=192.168.1.10Netmask=255.255.255.0
Server=192.168.1.5
Gateway=192.168.1.1
Image=ftd-boot-9.7.1.4.lfbff
On the laptop, I have
IP Address 192.168.1.5
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
With these setting...
