NOt possible. these failures are not monitored and there are no specific event that corresponds to such failures. And when the traffic stops, DFM assumes that the it is within the threshold limit set and does not generate an alarm,If there are any sy...
you have to set the logging level to atleast 6 to log such types of syslog messages. here is the link that will help you:http://www.cisco.com/warp/customer/477/RME/rme_syslog.html
You can try using the Access code generating option in BBSM to do this. This link will get you started:http://www.cisco.com/univercd/cc/td/doc/product/aggr/bbsm/bbsm51/manager/08acmgmt.htm#xtocid167988
