I have a Cisco 3725 Router with four serial interfaces and I configured per-packet load balancing on each serial interface. I also have HSRP configured on f0/0.Is it possible to have HSRP track all four serial interfaces without causing an HSRP fail...
I have a PIX 515. It is possible to configure the PIX to send outbound SMTP traffic to int1 and send outbound HTTP to int2? If so, I would I configure the PIX to do so?
We are thinking of adding a second ISP link to our environment. I wanted to find out if it was possible to use policy-based routing on PIX to send all SMTP traffic through ISP A (on int2) and all other Internet traffic through ISP B (on int3).After ...