Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have run a summary report across the whole organisation for Clients per Day however when running the same report for the Switches, Appliance and Wireless for each site (There are only 3) the figures are much larger client count.I would expect them ...
I have dozens of contracts built and all work okay when exporting the Summary Report, however I have 2 contracts that will not export at all. On the ones that fail i get the error "An error occurred while attempting to export data" after about 1 min....
We are using the data provided from the Organization and summary report and would like to schedule this however when this is done via a schedule and mailed there is no option for a csv report and the email you get is of no use.So can this be enabled ...
Just started playing with the 871w i just got however was looking to use this on my home network,
However the issue i have is that if i do an extended ping from the router to a hostname it works however via the vlan it fails or via any ethernet port ...
I want to provide data to my customer and have previously given it at site wide but if i then take just WIFI for example for all 3 sites they never match up, when I take the figures separately for each site and add them over overall they are well ove...
Here is the output
R1#sh vlan-switch
VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active10 VLAN0010 active Fa0, Fa1, Fa2, Fa320 VLAN0020 active1002 fddi-default act/unsup1003 token-r...
Well still not working but may help if i try to explain it better.My ISP router is 10.1.1.1 , connected to my cisco 871 via fa4 fa4 is 10.1.1.254output R1#ping bbc.co.ukType escape sequence to abort.Sending 5, 100-byte ICMP Echos to 212.58.246.78, ti...
Thanks tried that however now get this
R1(config)#do sh ip int brieInterface IP-Address OK? Method Status ProtocolDot11Radio0 unassigned YES unset administratively down downFastEthernet0 unassigned YES unset down downFastEthernet1 unassigned YES unse...
