Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Every so often my WLSM will show that the link to the WLSE is down, although both the WLSM and the WLSE still show a status of "Security Keys Setup". I can't find any other evidence of network connectivity issues between the devices and even after I...
I'm configuring FSR in my WLAN and I think I have it right, I'm just a little confused about some of the log messages I'm seeing.All of my AP's and MN's are registered with the WLSM.I have my AP's configured to use both WPA and CCKM for key-managemen...
WLSM is up and running, and is configured for FSR and appears to be working correctly.My question is what do some of the statistics displayed by the "show wlccp wds statistics" command on the WLSM mean?Here's my output:WDS Statistics for last 2d00h: ...
I have about 20 350-series AP's with 350-series PCMCIA client adapters that have been in production for over a year now. Lately I've had several AP's in the field stop authenticating clients, although no configuration changes had been made. These A...
If you're using Cisco client adapters you can specify some parameters to force it to look for a better AP. On the 350-series look at the RF Network tab in the profile's properties - specifically, the "Scan For A Better Access Point" settings.http://...
I have WPA running with WLSM as the WDS device. You didn't specify the AP model, but WPA works fine for my 1200-series AP's. My 350-series AP's are another story - can't get them to work (see my forum topic on that issue here: http://forum.cisco.c...
