Hi All.Does anybody know what does "8 routed interfaces" mean in "show sdm prefer" command:hotdog#sh sdm prefer The current template is the default template. The selected template optimizes the resources in the switch to support this level of feature...

Hi everybody.I have two 7200VXR interconnected via PA-A3-E3 interfaces. E3 link sometimes be unstable withhigh CRC errors level (20-50 CRCs) during short time (1..2sec). In 99.9% of cases, ATM interfaceflaps down/up, but sometimes it hangs. I used cl...

Hi everybody.I have two Cisco 7200VXR routers connected via ATM-E3 link (PA-A3-E3 cards). Sometimes (approximately once per week) after link down/up flow (CRC level on ATM interface in this short time increase) I have a serious problems with OSPF.Rou...

Hi everybody.I have catalyst 35550 (c3550-i5q3l2-mz.121-19.EA1) with configured simplest MAC access list attached to L2 interface:mac access-list extended xxx deny any any!interface FastEthernet0/2 switchport access vlan 20 switchport mode access n...

Hi everybody.I have cisco 7200VXR with PA-A3-E3 ATM adapter. When I turn on "debug atm error", I have periodicaly the following error messgase:00:17:18: ATM_OAM(ATM1/0): Bad Correlation tag. Received 0x326, Expected 0x2B0 from VPI:0 VCI:10400:18:22:...