Yes. The tool is located at the following url:http://www.cisco.com/cgi-bin/Support/CatCfgConversion/catcfg_xlat.plIt won't convert everything, but it will get you on your way.
No. In transparent mode the configuration revision number will always be 0. Usually in transparent mode a VTP domain name is not needed, but depending on the OS (IOS vs. COS) if you are using the switch to pass VTP information to servers or clients...
In 1999 the IEEE included Auto-Crossover State Machine (MDI/MDIX) as part of the 802.3 ab (Gigabit Ethernet) implementation. It appears that many vendors have extended that technology to work on with fast Ethernet links as well. However this featur...
To rename the VTP domain name you simply issue the following commands:For IOS: vtp domain For COS: set vtp domain YES there are GOTCHAS!!! When you rename a VTP domain on a switch, the configuration revision number is set to 0 so when it synchroni...
What version of SW are you running?The WS-X6148-RJ45 requires a minimum of 6.4(1) for the 6.X releases and a minimum of 7.2(2) for the 7.X releases.http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4498.htm#409995As for the Powe...