Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have the following:ISP DSL PPPoe --- (outside)PIX501(inside) --- my webserverI need to set up the PIX to forward traffic coming in from internet to outside port 80 into webserver port 80.But on the translation rules, the outside interface show as 1...
Is there a way to configure PPTP VPN over PPPoE DSL connection on PIX501 ?a cisco tech engineer says it is possible on pix, but no reference/docs are available.actually cisco docs say it is NOT possible on pix 6.2. see:http://www.cisco.com/en/US/prod...
the configuration:I have a PIX 501.The PIX external interface is on a DSL with fixed IP.The PIX internal interface is on LAN with 4 PC's. There is a lot of traffic on the LAN between 3 of the PC's (digital video recorders) and the 4th PC that is used...
few questions regarding PIX 501. PIX config attached at bottom.My network is:DSLmodem (got 5 extern IP's) --------- pix ----------- host 192.168.1.100QUESTION 1: I can't I browse the Internet from host 192.168.1.100 - I have it now so that any traff...
regarding the change on the access-list - I did it.regarding the static config - it has to be port 80 on inside interface to port 80 on outside interface, since it is a static port mapping. I do it on other pix's and it works fine.the problem is that...
1. listed below PIX 501 config.2. my network config is:- I have one box - a web server - 10.100.100.100 - it's behind the PIX and it is permitted to go outside (Internet etc').I have a dns2go service running on the webserver. if you are not familiar ...
so can I create an IPSec VPN with cisco VPN client, or only as fixed tunnel with PIX-PIX IPSec?and is there any idea if PPTP will be enabled on pix501 with pppoe in the future?
cisco docs say it is NOT possible on pix 6.2. see:http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801055dd.shtmlbut is there a way to do it?I tried VPN wizard for PPTP and got the following message on the P...
I have Verizon DSL (PPPoe) connected to my PIX501 ver 6.2.2 PDM 2.0.2.I had to disable vpdn on outside interface on the PIX otherwise PPPoe wouldn't work (it can't have both PPPoe and vpdn on same interface accoring to the PIX error message).does tha...
