Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Wondering if I can do this. Here at corp I have a 3005 and my external small offices all connect into it via 3002 hardware client.I am bringing on 4 new offices all of hilton head island. I would like to place a 3005 out there at Hilton Head Island...
Does anyone happen to know if there are any MIBS designed specifically for the Cisco 3002 VPN hardware client? Having a heck of a time finding anything other than generic ones.Thanks
All,Am trying to pull off the following:We manage several remote sites that all have a 512 frame circuit and a 3002 VPN box on their end connecting back to a 3005 vpn server here at corporate.What we want to do is have site A connect back to corporat...
All,I am trying to troubleshoot a situation and am seeking some guidance.Here at corporate I have a 3005 concentrator. Out in the field I have 14 offices connected to the 3005 via the 3002 hardware client. All pipes out in the field are as follows:...
All, I am a windows admin who has been delegated the duty of working with the pix - go figure. Anyways I have a pix 525 running 6.3. Coming off of one of the interfaces of the pix I have a test network. That interface has a security rating of 50 whil...
Sorry - I should have been more specific. I have 4 windows 2000 servers that I want to balance. They all have the same apps, etc. and am looking to do something similar to what the F% Big IP 1000 can do, just with a cisco box
No I did not apply it to an interface. However I just applied the following to e 0/0conf tint e 0/0 ip access-group 101 inHG-Internet(config)#access-list 101 deny icmp any any echoHG-Internet(config)#access-list 101 deny icmp any any echo-replyThen ...
Thanks. I have just put it in there and will let you know how it goes in approx. 7 hours. If I understand the command correctly, when the ISP drops our channels, then the 804 will wait for 60 seconds before attempting to redial. Is this correct?Th...
