About a999

a999 · 10-21-2003

I have form a dmz in pix, for example, assigning 157.1.1.0/24 for outside, assigning 157.128.1.0/24 for dmz, and assign 10.10.10.0/24 for inside.An inside node act as mail server for internet.The command is:(conf)#static (inside,outside) 157.1.1.9 1...

a999 · 10-17-2003

My pix have 3 interfaces:inside,outside and dmz.I have configured multi-PAT between inside and outside via saming NAT ID.But now I want translate all my internal network addresses to dmz with ONE PAT address with following command:(conf)#nat (inside...

a999 · 10-21-2003

hi,thanks for your advises.At the last, I had to do just like what you said,allocate many REAL ip address for inside usres visiting dmz.

a999 · 10-18-2003

Hi,I try to add just like your advise,but the system info:global for this range already exists. So can't use one global address for multi-translation.I use pixos 6.3.3.

a999 · 10-17-2003

Thanks for answering.If the configuration like follow:nat(inside) 25 0 0 nat(inside) 26 10.10.1.0 255.255.255.0nat(inside) 27 10.10.2.0 255.255.255.0global (outside) 25 10.10.10.10global (outside) 26 10.10.10.11global (outside) 27 10.10.10.12global (...

Member Since	‎07-23-2002 06:06 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	5

User Statistics

User Activity

Two subnet in multi-interfaces

NAT/PAT problem

Re: NAT/PAT problem

Re: NAT/PAT problem

Re: NAT/PAT problem